Catalog pricing shown. Please Sign In to see your pricing.
Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 80Pct Furnace 080 MBH 16.5 SEER2
Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 80Pct Furnace 080 MBH 16.5 SEER2
Kit Includes BIP Gas Cock, PVC Ptrap Kit, Electrical Box, Switch, Receptical & Duplex Cover, whip 6' 3/4" 8GA, Disconnect, 50' Line Set 1/2" Insul, PVC Adapters/Fittings, No Vent Caps, 2" Plastic Pad, Furnace Leveler, 2H/2C Thermostat
Motor Freight
- Vendor Name:
- Arcoaire
- URI Part Number:
- Arcoaire AC Single Phase Split System Deluxe Multi Stg 3 Ton 42k BTU Coil 80Pct Furnace 080 MBH 16.5 SEER2
- Shipping Weight (Lbs.):
- 200
- Energy Star:
- Energy Star 6.1 Compliant: 15.2 SEER2, 12.0 EER2
- Heating Input (BTUH):
- 080 MBH Heat
- Includes:
- H4A7T36AKAWA, F80CSU0802120A, EVD4X42M21A, ACGKIT9
- Nominal Capacity (BTUH):
- 36000
- Cooling Efficiency (EER2):
- 13
- Cooling Efficiency (SEER2):
- 16.5
- Heating Efficiency HSPF2:
- A/C is Energy Star 6.1 compliant
- System Indoor Type:
- ULN Gas Furnace
- System Outdoor Type:
- Multi Stage
- System Coil Configuration:
- Vertical Power "V
- Furnace Efficiency:
- 80
- System Nominal Tons:
- 3
- AHRI System Number:
- 210697252
A/C, Single Phase, Split ULN Gas Furnace Multi Stage, Vertical Power "V" H4A7T/F80CSU/EVD4X
Air Conditioner Condenser
Air Conditioner Condenser
- 2 Stage Copeland Scroll Ultratech Compressor
- Welded Aluminum Tube / Aluminum Fin Coil
- Improved Efficiency w/ Multi Directional Internal Enhancements
- Less Sensitivity to Pressure Drop
- Heat Shrink Wrap Protects Copper / Aluminum Joints
- AL/AL w/ Zinc Cladding Provides Enhanced Corrosion Protection
- Approximately 50% Lighter than Copper Coils
- Filter Drier Supplied for Field Installation
- Self Configuring Operation & Text Based Diagnostics w/ Ion Control
- Compressor Sound Blanket & Isolation Grommets Factory Installed
- Extended Service Valve to Accommodate Press Fittings
- High & Low Pressure Switches
- Outdoor Temp Sensor Factory Installed
- Factory Charged w/ R410A Refrigerant
- Long Line Set Capability (refer to spec sheet for details)
- Low Ambient Cooling Capable w/ Optional Kit
- Galvanized Steel Cabinet w/ High Gloss, Baked on Powder Coat Paint
- Corner Posts for Added Cabinet Strength
- Coated Hail Guard Coil Protection
- Post Painted (black) Coil
- Coated Cabinet Screws
- Internal Pressure Relief Valve & Thermal Overload
Ultra Low NOx Gas Furnace
- High efficiency variable-speed, constant airflow (VCA) ECM blower motor
- Variable-speed induced draft combustion motor
- Single-stage gas valve
- Stainless steel primary heat exchanger
- Reliable direct gas ignition with silicon nitride ignitor
- High temperature limit control designed to prevent overheating
- Solid, pre-painted steel cabinet with tight fit door latch system
- Sound-reducing features: fully insulated cabinet with soft mounted blower and inducer motor
- 4 Way Multipoise
- Natural Gas only, not convertible to Liquid Propane
- Compatible thermostat: Ion System Control for full function and efficiency capability, Wi-Fi remote access convenience and intelligent diagnostics±
- Heating capacity: 40,000 - 100,000 BTUh
- Corrosion Resistant Aluminum
- Low Pressure Drop
- TXV metering device factory installed
- Compact design, shorter than A-coils
- Hemmed flanges for safer handling
- Cabinets meet or exceed 2% air leakage codes
- UV knockout
- No delta plate allows easy cleaning
- 30-40% Lighter than “A” Coils
- 80% Fewer Factory Braze Joints vs. “N” Coils
- V Design Reduces Cabinet Sweating
- Helium leak tested @ the factory
